YA

Tank equipment is a whole complex of things necessary for industry, which are needed for storing liquids and gases, pumping them for further use, etc. The variety of tank-type products is due to the fact that they are used in a wide variety of production areas, so they can accommodate a completely different environment. Accordingly, each substance requires special conditions for storage to be safe and reliable, complying with technological standards.

CONSTRUCTION of capacitive equipment
Tank equipment is supplied for oil, gas, chemical, metallurgical and other industries. Almost everywhere where there is a need to use liquids and gases for the manufacture of products, as well as to support any technological processes, you need to use capacitive equipment from our catalog.

Tank equipment is needed for temporary short-term and long-term storage, to feed consumables into the production line, to provide supplies for maintenance operations and other activities. They are the primary way to safely store gases and chemicals. They provide a high level of isolation from the outside environment. Some can serve to mix multiple media. All of this together refers to tank-type equipment.

ЕМКОСТИ ИЗ ЛЕГИРОВАННЫХ И НИКЕЛЕВЫХ СТАЛЕЙ И СПЛАВОВ.

ЕМКОСТИ ИЗ ЛЕГИРОВАННЫХ И НИКЕЛЕВЫХ СТАЛЕЙ И СПЛАВОВ. Tanks made of alloy and nickel steels and alloys. Material execution: stainless (304, 321, 316L/Ti/H, duplexxx 2205/2507, etc.) and alloy steels, titanium and its alloys (BT1-0, Ti Gr2/Gr2/Gr12, nickel, nickel, etc.). ) and alloy steels, titanium and its alloys (BT1-0, Ti Gr2/Gr7/Gr12), nickel alloys (N5(N02201)、N6(N02200)、NCu30 (N04400), C22(N06022)、Hatelloy C276 (N10276)、C2000 (N06200)、C4(N06455)、C59(N06059)、Inconel600 (N06600)、Inconel800 (N08800)、Inconel625 (N06625)、Incoloy825 (N08825)、Monel400(N04400)、B2(N10665)、B3(N10675), Zirconium), etc;

SPHERICAL TANKS OF LIQUID GASES

Spherical tanks are used in the petrochemical industry, mainly for storage of gasoline and liquefied gases.
The key characteristic of this type of tanks is that they can be used at exceptionally high overpressure from 0.25 to 2.0 MPa. Their volume varies from 600 to 6000 m3.
The main elements of the spherical tank design are the casing, which is assembled from petals (item 2), as well as the dome (item 1) and bottom (item 3).
Spherical tanks are installed on supports, the number of which is calculated based on the volume of the tank and its operating conditions. Usually the support system is made of I-beams or pipes, which are connected on site to give the structure spatial rigidity.
Spherical tanks are manufactured using alloy steels from 16 mm to 40 mm thick. Such steel has improved characteristics in comparison with medium carbon steel grades: it is less susceptible to aging, has increased strength and can be operated at high temperatures up to +500ºС.

ENAMELED TANKS

ENAMELED TANKS


To order the above equipment from UNICS ENGINEERING LLC you can:

- Call us by phone +7 (495) 648-62-78
- Send a request to e-mail office@unix-eng.ru
- Ask a question on our website

Вверх